Home > Europe > News 
Chlorine & Sulphur Free Cutting Oil
RELEASED: 2010-01-27
|
|
|
TRIM® OM 220 SCF is a high quality neat cutting oil designed for general machining operations on both ferrous and non-ferrous alloys. TRIM® OM 220 SCF contains no sulphur or chlorine containing extreme pressure additives. The use of TRIM® OM 220 SCF ensures excellent tool life and surface finishes. TRIM® OM 220 SCF is safe for use on aluminium alloy and steel alloy parts as well as cast iron, copper, brass and bronze.
- Sulphur and chlorine free extreme-pressure additive package for efficient metal removal.
- Formulated to handle a variety of applications.
- Excellent compatibility with copper containing alloys.
- Has replaced dark, heavy active sulphur/chlorine oils in several operations whilst providing superior results in tool life.
- Excellent oxidative stability.
- Low odour and low misting.
|
|
TRIM® OG223
Medium to Heavy Duty Neat Grinding Oil
RELEASED: 2009-11-24
|
|
|
TRIM® OG 223 is a medium to heavy-duty neat grinding oil. TRIM® OG 223 is designed for use in grinding operations of hardened steel alloys, tool steels, stainless steels, inconels and titanium. TRIM® OG 223 is formulated to comply with aerospace regulations, i.e. no chlorine and no active sulphur additives. TRIM® OG 223 can also be used to machine all materials, including yellow metals, in high pressure applications where low oil mist is advantageous.
- Excellent extreme-pressure additive package for efficient metal removal.
- Chlorine and active sulphur free.
- Excellent filterability in precoat filter systems.
- Hydrocracked base oil ensures very low misting potential.
- Very High flash point.
- Low foaming.
- Excellent oxidation stability.
- Excellent compatibility with copper containing alloys.
- Light colour and low odour for good operator acceptance.
|
|
TRIM® E909
Cutting and Grinding Fluid Concentrate
RELEASED: 2009-07-20
|
|
|
TRIM® E909 is a high lubricity universal soluble oil which requires minimal maintenance in even the most
demanding fluid management systems. TRIM® E909 has broad application in machining and grinding of a
broad range of materials. The high levels of both chemical and mechanical lubricity in this product handle the
tough machining and grinding jobs. The stable and predictable performance of TRIM® E909 makes it a first
choice for high quality, consistent parts manufacturing.
- A very universal product that works well in a wide range of operations.
- Compatible with aluminium, all steels, yellow metals and cast iron.
- Tried and tested extreme pressure (EP) additive controls built-up edge in tough operations.
- Hard water tolerant.
- Low foam even at high pressures.
- Fine soluble oil emulsion reduces carry-off for low total operating cost.
- Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion
prevention.
- Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures.
- Easily recycled or disposed of without special handling or equipment.
|
|
TRIM® VHP® E820
Cutting and Grinding FLuid Concentrate
RELEASED: 2009-07-20
|
|
|
VHP® E820 is an aerospace approved, low to no foam chlorine free soluble oil. It is ideally suited for those
operations that utilize high-pressure, high-volume coolant. VHP® E820 is a fluid that will allow you to get
maximum benefits from high velocity through-the-tool coolant delivery systems on VMCs and HMCs and will
assist in achieving maximum productivity from creep feed and VIPER grinders. While VHP® E820 is very stable
and operator “friendly”, its greatest strength comes from its ability to help you get the job done. It is compatible
will all metals and many non-metallic materials as well. Even with a product as “gutsy” as VHP® E820 it will run
for extended periods of time without additives and do so in a very clean manner.
- A very versatile product that works well in a wide range of operations such as production, creep feed
grinding and milling, turning, drilling, and tapping
- Proven performer in difficult creep feed grinding operations
- Fine soluble oil emulsion reduces carry-off for low total operating cost
- Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion
prevention
- Very low foam, without the use of conventional defoamers
- Easily recycled or disposed of without special handling or equipment
- Contains no DEA, boron, chlorine, nitrites, formaldehyde donors, or phenolic compounds
|
|
TRIM® C272
Cutting and Grinding Fluid Concentrate
RELEASED: 2009-04-01
|
|
|
TRIM® C272 is a chemical surface active or synthetic coolant concentrate designed to operate at very high fluid pressures and volumes with little or no foam. TRIM® C272 is ideally suited to situations where high coolant velocities or volumes are necessary to achieve maximum productivity. TRIM® C272 is designed to have the superior cooling and chip settling characteristics of a premium synthetic product with the improved residues and mechanical lubricity of a semi-synthetic coolant. This product utilises an extremely effective and proprietary non-chlorine, non-sulphur extreme pressure additive for good tool life and improved surface finishes
- Very stable formula provides long operational life with consistent performance.
- Chlorine and sulphur free extreme pressure (EP) additives control built-up edge (BUE).
- Excellent choice for nickel alloy, steel alloy and cast iron machining and grinding.
- Extremely low foam in mineral free water.
- Excellent tramp oil rejection.
- Water clear dilution aids filterability, reduces carryoff and facilitates getting the fluid to the point of cut.
- Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures.
- Easy recycling or disposal with conventional techniques and equipment.
- Contains no DEA, boron, chlorine, formaldehyde donors, nitrites or phenolic compounds
|
|
Clean Tower
Highly efficient oil filtration system
RELEASED: 2008-09-26
|
|
|
Are you looking to reduce your oil consumption?
Are you looking to increase your productivity by improving the condition of your oils?
Are you interested in significant savings by purifying and extending the life of your oils?
Then we can offer a simple, highly efficient and proven oil filtration system for your general oil purification needs. The filtration unit, Clean Tower, would be a very efficient addition to your existing filtration systems and with its compact size and mobility can be shifted around the manufacturing plant with ease. Even though the unit is highly efficient in purifying down to 3 micron and very reliable, it is surprisingly inexpensive. In fact, the Clean Tower can compete, very successfully, against complex filtration systems, given its’ overall performance and price.
- Filtration down to 3-5 micron
- Small footprint
- Significantly lower capital cost
- Portable
- Relatively low energy consumption
- Simple design
- Ease of attaching to existing filter systems
- Dirty cartridges can be sold onto metal recylcers
|
|
Effective in removing oil from coolants and washing solutions
RELEASED: 2008-05-21
|
|
|
The SCROUNGER® Jr. features a revolutionary new oleophilic belt, but uses a more compact scraper blade to strip the separated oil from the belt.
coolant destroying bacteria
undesirable residues on machine tools and
workpieces
smoke and oil mist in shop atmospheres
The results of these problems are:
- shortened coolant life
- poor material removal rates
- poor surface finish and size control
- decreased tool and wheel life
Features:
- 115 volt/220 volt, single phase, 50/60 Hz
- Heavy-duty, impedence-protected, fan-cooled drive motor with a hardened shaft and needle bearings (220 volt, single phase, 50 Hz available also)
- Open, accessible oil collecting tray with a convenient drain connector
- Oleophilic, 'oil loving' belt
- Heavy-duty steel construction, with industrial-grade enamel paint
Benefits:
- Fast, simple belt changing
- Low maintenance
- Lower hang roller that will not fall off in the machine sump even in turbulent conditions
|
|
TRIM® E925
Cutting and Grinding Fluid Concentrate
RELEASED: 2008-03-19
|
|
|
TRIM® E925 is a revolutionary hybrid soluble oil based on a unique blend of mineral oil based and vegetable ester based additives. Vegetable ester technology gives TRIM E925 extremely high cutting performance without using traditional chlorinated or sulphurised EP additives. This “green” environmental profile is further enhanced by the fact that TRIM E925 does not contain boron or formaldehyde donor compounds. TRIM E925 is a proven, superior product for machining high strength steels, stainless steels, aluminium and corrosion resistant aerospace alloys.
- Extremely high levels of lubrication without chlorinated or sulphurised EP additives.
- Compatible with aluminium, all steels, yellow metals and cast iron.
- Extremely hard water tolerant.
- Low foam even at high pressures.
- Fine soluble oil emulsion reduces carry-off for low total operating cost.
- Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion
prevention.
- No aggressive biocides.
- Easily recycled or disposed of without special handling or equipment.
- Contains no DEA, boron, chlorine, sulphur, nitrites, formaldehyde donors, or phenolic compounds.
|
|
All Purpose Cleaner PMC 1455-11
RELEASED: 2008-03-10
|
|
|
TRIM® TASK2™ All Purpose Cleaner is an industrial strength, water-based cleaning agent that does an outstanding job in the industrial environment for cleaning a variety of shop soils from all common surfaces. TASK2 out-cleans all the green, crystal, purple, and blue butyl-based products you may have tried in the past.
- Has been proven to clean shop soils off of surfaces better than the “leading national product” of this type
- Contains no “Butyl”, and also has very low V.O.C. content
- Environmentally friendly, biodegradable, and contains no caustic, silicates, phosphates, nitrites, phenols, or borates
- Safe on all metals and most surfaces at room temperature
- Has very low conductivity and pH and will not harm TRIM® metalworking fluids
- TASK2 All Purpose Cleaner is nontoxic
|
|
Glass Cleaner PMC 1406-41
RELEASED: 2008-03-10
|
|
|
TRIM® TASK2™ Glass Cleaner is an industrial strength, water-based cleaning agent that does an outstanding job in the industrial environment for cleaning machine tool glass and other hard surfaces.
- Has been proven to clean shop soils off of glass and plastic surfaces better than the “leading national product” of this type
- Contains no “Butyl”, and also has very low V.O.C. content
- Environmentally friendly, biodegradable, and contains no ammonia, caustic, silicates, phosphates, nitrites, phenols, or borates
- Safe on all metals and most surfaces at room temperature
- Has very low conductivity and pH and will not harm TRIM® metalworking fluids
- Great on glass, ceramics, stainless steel, chrome, Formica, and much more
- Residue–free formula
- Strong enough to cut through tough shop soils
|
|
Palm Abbe™ Digital Refractometer
RELEASED: 2007-02-22
|
|
|
|
|
REICHERT INDUSTRIAL FLUID TESTERS
for quick and accurate checks of concentration in any industrial fluid
RELEASED: 2007-01-18
|
|
|
Maintaining the proper concentration in industrial fluids is extremely important to maximize the performance and value of the fluid. If the fluid is run too lean, tool life and fluid life can drop dramatically. If the fluid is run too rich, you\'ll just be wasting your money.
The Reichert Automatic Temperature Compensating Refractometers help you quickly determine the concentration or ratio of a variety of industrial fluids.
- Cutting and grinding fluids
- Synthetic machining fluids
- Plating and acid baths
- Cleaner baths
- Water-based hydraulic fluids
- Die lubricants
- Chromating solutions
|
|
TRIM® SC511
Cutting and Grinding Fluid Concentrate
RELEASED: 2006-12-21
|
|
|
TRIM® SC511 is a medium oil semisynthetic concentrate designed as a general purpose multi-metal coolant for general machining of ferrous and non-ferrous materials. TRIM® SC511 has the wetting and cooling characteristics of a premium heavy-duty synthetic for superior turning, milling and grinding results. It also has sufficient lubrication for most “down-the-hole” operations on machining centers.
- A very versatile product that works well in a wide range of operations such as grinding, milling, turning, drilling, and tapping.
- Extremely good product for cast iron and steel machining and grinding.
- Extremely fine emulsion reduces carryoff for low total operating cost.
- Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention.
- Extremely hard water tolerant.
- Easily recycled or disposed of without special handling or equipment.
|
|
|
|
Aerospace
